Pinion Brake Kits
Both big bearing and small bearing kits are available. Sold as either a basic kit or a complete kit.
The complete kit contains the bracket, rotor, hardware kit along with caliper and pads. The basic kit excludes the caliper and pads, but the caliper and pad numbers will be provided. If you buy the basic kit, you will need to go to your local autoparts store and get the caliper and pads.
This is the updated kit. Both big bearing and small bearing kits WILL work on the driveshaft side if needed. Check clearances for upper 4 link bars before ordering if you plan to use on the driveshaft side. The rotor is 13″ I.D. All parts to this kit are new, not used.
Small bearing: complete kit $220 or basic kit $150 plus shipping
Big bearing: complete kit $270 or basic kit $200 plus shipping.
Big bearing kit is for the end of the pinion with the 8 bolt seal retainer.
2.5 ton to 5 ton driveshaft adapters or 5 ton to 2.5 ton, whichever is the case $250 per pair plus shipping
Orbital valves, cross over relief valves, steering rams. Call for pricing.
Ram Mounts $90 plus shipping
4 link helmet consists of helmet plates, upper link tabs and gussets $150 per helmet plus shipping. Helmet plates are 1/2 inch material. Tabs are 3/8 inch material. Gussets are 1/4 inch material.
lower axle link tabs $50 per axle (4 tabs) plus shipping
two styles available – chose either mid-axle mount or below the tube mount. Tabs are 3/8 inch material.
starting at $375 depending on diameter, thickness and for one-off designs
Light weight, heavy duty 25 inch 2 piece monster truck wheels. Any width, any bolt pattern, or any offset. Smooth barrel design with bolt on outer bead. O-ring sealed. Call for pricing. Full beadlock conversion extra.
Trucks running our wheels include Razin Kane, Ice Cream Man, Tow Monster, Vaters Monster Motorsports, Storm Damage Racing and a few other well known teams.